manualshive.com logo in svg

SICK outdoorScan3 Core I/O, Operating Instructions Manual

Share
Download
SICK outdoorScan3 Core I/O Operating Instructions Manual Download Page 15

3.2

Product characteristics

3.2.1

Device overview

Figure 4: Device overview

1

Optics cover

2

Display

3

Keypad

4

USB connection

5

Status LEDs

6

Additional LEDs for ON state and OFF state

7

Safety laser scanner without system plug

8

System plug

Different variants of the safety laser scanner are available, 

see "Variants", page 16

.

Further information about the variants 

see "Variant overview", page 129

.

All variants have an optics cover and the rotating mirror is located below the optics
cover. The light pulses are emitted and the reflected light pulses are received through
the optics cover.

The display with 4 pushbuttons is located below the optics cover. The safety laser scan‐
ner also has a number of light emitting diodes, 

see "Status indicators", page 16

, 

see

"Buttons and display", page 106

.

Information about connections: 

see "Connections", page 17

.

The safety laser scanner can be mounted and operated in any alignment. In this docu‐
ment, position and direction information is used as follows with respect to the safety
laser scanner, as long as different usage is not indicated separately:

•

The top is the side of the safety laser scanner on which the optics cover is located.

•

The bottom is the side of the safety laser scanner opposite the optics cover.

•

The front is the side of the safety laser scanner on which the display is located.
The 90° angle of the sector of a circle scanned by the safety laser scanner points
in this direction.

•

The back is the side of the safety laser scanner opposite the display. The sector of
a circle not scanned by the safety laser scanner lies in this direction.

PRODUCT DESCRIPTION 

3

8023152/160F/2019-11-14 | SICK

O P E R A T I N G   I N S T R U C T I O N S | outdoorScan3 Core I/O

15

Subject to change without notice

Summary of Contents for outdoorScan3 Core I/O

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands