Chapter
4
Operating Instructions
CLX490 Compact OMNI Scanner
4-10
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8009237/RB47/2007-08-03
Installation
3.
Connect the distance sensors to the "IN 0 to IN 4" switching inputs on the CLX via the
AMV/S60 Connection Module (see
Chapter 5.5.7 Connecting the switching inputs,
).
4.
Set the focus positions for the required reading ranges on the R
EADING
C
ONFIGURATION
tab in the CLV-Setup program. To do so, choose the I
NPUTS
/S
ERIAL
option in the drop
down list of the F
OCUS
C
ONTROL
section.
5.
Click the D
ISTANCE
C
ONFIGURATION
button and edit the required entries in the dialog box
that is then displayed (default: Focus position F 1 up to F 8 = 1,200 mm).
6.
Chapter 4.3.2 Adjusting the CLX, Page 4-6
, choose the standard de-
coder.
7.
Perform a temporarily download to the CLX.
8.
Start Percentage Evaluation mode
9.
Check the reading quality in all distance configurations while the conveyor bel stationary.
10. Then check the distance detection function in Reading mode under realistic conditions.
To do so, monitor the reading result in the Terminal Emulator as described in
Chapter 4.4.2 Mounting the external reading pulse sensor, Page 4-8
11. If the distance detection function operates correctly, reset the decoder to the SMART/
S
TANDARD
option and perform a permanently download to the CLX.
Note
The CLX can switch between a maximum of 8 distance ranges for slow search runs using
the integrated timer reversal points. The CLX can be switched between a maximum of 8 dis-
tance ranges synchronously to the reading process using command strings.
4.5
Dismantling the device
1.
Switch off the power supply to the AMV/S60 Connection Module.
2.
Undo the screws for the cable connections on the CLX and disconnect the cables.
With mounted external parameter memory (in connector cover)(optional):
Undo both screws and remove the cover.
3.
Unscrew the CLX from the mounting device.
When removing the device from service for the last time, please dispose of it in an
environmentally-friendly manner, as described in
