Chapter
10
Operating Instructions
CLX490 Compact OMNI Scanner
10-24
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8009237/RB47/2007-08-03
Appendix
10.6.11 Log file in the Terminal Emulator
The Terminal Emulator can log the communication between CLV-Setup and the CLX.
CLV-Setup stores the data transmitted in both directions with the following identifiers:
--> PC:
CLX sending to CLV-Setup
PC -->:
CLX receiving from CLV-Setup
1.
Click
in the toolbar.
The Terminal Emulator window opens.
2.
Click the empty checkbox in front of the W
RITE
L
OGFILE
option on the right.
The S
AVE
L
OGFILE
AS
... dialog box opens.
3.
Enter a file name with the extension ".log" and exit the window by choosing S
AVE
.
CLV-Setup saves the file in the "data" directory and records an entry in the log file.
4.
To deactivate the log function, click the checkbox in front of the W
RITE
L
OGFILE
option
again or close the Terminal Emulator window.
10.6.12 Starting CLV-Setup with an "INI file" as an argument
When the program is started, CLV-Setup can also be transferred the name of an "INI file" as
a parameter. To do so, enter "/INI" in front of the file.
Example:
"CLVmain32.exe\
data
\Set1_CLX490.scl /INI user.ini "
CLX-Setup is launched with the initialization data contained in the "user.ini" file and loads the
configuration file "Set1_CLX490.scl" from the "data" directory straight away.
The "user.ini" file must be stored in the same directory as "CLVmain32.exe".
You can use this method to link CLV-Setup to several different configurations on your
Windows desktop.
In this way, for example, you can prevent CLV-Setup from attempting to establish a
connection when a CLX is not connected.
10.6.13 The CLV Assistant
The CLV Assistant is not suitable for parameterizing the CLX.
