Table 19: Start position settings
Setting
Meaning
Positive value
Delayed by the specified number of measurements and then
starts the memory function
0
Starts the memory function as soon as the start condition is met
Negative value
Starts the memory function after a defined number of measure‐
ments have been taken
Values of
±
50,000 are possible; the default value is 0.
7.3.11.9
View process
All recorded measurements are listed in this table.
By clicking on the underlined link with the file name of the measurement, the measure‐
ment file can be downloaded in CSV format (values separated by commas).
By clicking in the rows of the corresponding measurement outside of the link, the meas‐
urement process is displayed on the page.
7.3.12
Info
Figure 52: Overview of the Info tab
Via this display, the device status can be checked and information can be adjusted.
Information on the sensor
The following device information is displayed:
•
Interface version
•
Firmware version
•
Temperature
•
Sensor operating hours
•
Laser operating hours
•
Serial number
•
Device type
7
OPERATION
52
O P E R A T I N G I N S T R U C T I O N S | OD5000
8021391//2017-10-06 | SICK
Subject to change without notice
