1 (8)*
2 (7)
3 (6)
4 (5)
7 (2)
8 (1)
5 (4)
6 (3)
1
Figure 34: Peak detection
1
Laser
1 = Near
(8) = Far
Near is selected as the standard setting, i.e., the numbering increases from the side
closest to the sensor.
7.3.6
Settings for channels A–D
Figure 35: Overview of the settings tab for channels A–D
7.3.6.1
Setting the measurement value filter
The measurement value filters optimize the signal diagram in order to simplify the eval‐
uation by the control system (e.g., for regulation tasks). You can select from the follow‐
ing filters:
•
Mean filter
•
Median filter
By default, the mean filter is set to a filter depth of 256 measured values and the
median filter to a filter depth of 31 measured values.
7
OPERATION
36
O P E R A T I N G I N S T R U C T I O N S | OD5000
8021391//2017-10-06 | SICK
Subject to change without notice
