SICK OD2000, Operating Instructions Manual

Page: 22 / 58

Function RUN mode starting
point Description
Display light distribu‐
tion curve Distance(bar) Display qualitative light intensity distribution on
the receiver element.
The light distribution curve is divided into four
areas on the display. The device automatically
changes to the area where the maximum is
located.
Teach in analog val‐
ues, scale analog
characteristic curve
2)
Analog value Teach in the upper and lower limit values of
the analog characteristic curve. Creates a scal‐
ing of the analog characteristic curve.
Set mode Mode Choose between Precision , Speed and Custom‐
ized modes.
Make suitable default settings depending on
the application.
Recording data Recording
To start recording data, briefly press the
pushbutton. To stop the recording, briefly press
the
pushbutton again.
When starting a recording, the previously made
recording is automatically deleted.
Analyze data Recording To display the results of the recording, press
the
pushbutton for > 3 seconds.
1) SP2 is only available in the output mode window.
2) The function is only available if the output is set as an analog output in the main menu.
Further topics
• Quick menu structure
7.1.3 Opening main menu
Menu groups in the main menu
• Measurement
• Q1 Output
• Q2 / Qa Output
• IN Input
• Device
• Info
• Back to Run
Opening menu group in main menu
1.
To open the main menu, briefly press the pushbutton in RUN mode.
2.
Use the and pushbutton to select a menu group.
3.
Confirm the selection with the pushbutton.
✓
The display shows the corresponding menu group.
Further topics
• Description of operation (information about the individual menu groups)
• Menu structure in the main menu
7.1.4 Setting parameters
Selecting parameters
1.
Within a menu group, use the and pushbuttons to select the desired
parameter.
2.
Confirm selection with the pushbutton.
7
OPERATION
22 O P E R A T I N G I N S T R U C T I O N S | OD2000 8026231//2021-11-17 | SICK
Subject to change without notice