Figure 7: Make an extensive and low-impedance ground connection of the cable shield in the
control cabinet.
Figure 8: Shield connection in plastic housings
NOTE
Prevent equipotential bonding currents via the cable shield with a suitable grounding
concept. If necessary, ground currents on the EtherNet/IP cabling can be prevented by
the use of an EtherNet/IP adapter (part number 2044264).
6.3
Connecting the device electrically
NOTE
The connection diagram, and information on inputs and outputs, can be found on the
side plate on the device.
NOTICE
All electrical circuits must be connected to the device with safety extra-low voltage
(SELV or PELV).
6
ELECTRICAL INSTALLATION
18
O P E R A T I N G I N S T R U C T I O N S | OD1000
8019642/ZJW1/2017-04-03 | SICK
Subject to change without notice
