Example
Figure 6: Example configuration with 1 protective field
Figure 7: Example configuration with 2 protective fields
6.2.3
Configuring network
Approach
1.
Click on the Hamburger icon.
2.
Under
System
, click on
Network
.
3.
Activate
Static Address
.
4.
Configure network settings as desired. The subnet address specified here must
match the subnet address configured in the nanoScan3 Tool - URCap configura‐
tion software.
6
CONFIGURATION
16
O P E R A T I N G I N S T R U C T I O N S | nanoScan3 Tool - URCap
8025720/1A9R/2020-12-15 | SICK
Subject to change without notice
