SICK MITSUBISHI ELECTRIC MELSEC iQ-F FX5, User Manual, Page: 132 / 176

130
APPX
Appendix 2 Standards
Appendix 2
Standards
Certification of UL, cUL standards
FX5-SF-MU4T5s and FX5-SF-8DI4s support UL (UL, cUL) standards.
For the models that support UL standards, refer to the following file number.
UL file number: E336245
Safety functions of a safety extension module are not evaluated by UL. The safety extension module is certified based on the
UL 508 general application standard.
Compliance with EC directive (CE marking)
The EC directive does not guarantee that an entire machine produced in accordance with the contents of this note will comply
with the following standards.
Compliance to EMC directive and the low voltage directive (LVD) of the entire mechanical module should be checked by the
manufacturer. For more details, please contact your local Mitsubishi Electric sales office.
Requirement for compliance with EMC directive
The following products have shown compliance through direct testing (of the identified standards below) and design analysis
(through the creation of a technical construction file) to the European Directive for Electromagnetic Compatibility (2014/30/
EU) when used as directed by the appropriate documentation.
Considerations
This product is designed for use in industrial applications.
Product compatibility
Type: Programmable controller (open type equipment)
Models: FX5 manufactured after the following date
September 1st, 2019 FX5-SF-MU4T5 FX5-SF-8DI4
Electromagnetic compatibility (EMC) directive Remarks
EN61131-2:2007 programmable controllers
- Equipment requirements and tests Compliance with all relevant aspects of the standard.
EMI
• Radiated emission
• Conducted emission
EMS
• Radiated electromagnetic field
• Fast transient burst
• Electrostatic discharge
• High-energy surge
• Voltage drops and interruptions
• Conducted RF
• Power frequency magnetic field