7.14
Monitoring cases
Overview
Figure 78: Monitoring cases
1
Add monitoring case table
2
Configured field sets
3
Settings for the whole monitoring case table
4
Settings for the individual monitoring case
5
Input conditions for a monitoring case
6
Field set in the monitoring case and in the cut-off path
7
Cut-off paths
8
Areas for defined cut-off behavior
9
Remove field set from a monitoring case
In the monitoring case editor, you can also define the monitoring cases with input
conditions and assign the field sets.
Further topics
•
7.14.1
Settings for monitoring case tables
Name
In the
Name
field, enter a name for the monitoring case table that is as descriptive as
possible.
CONFIGURATION
7
8025424/1ELL/2022-01-21 | SICK
O P E R A T I N G I N S T R U C T I O N S | microScan3 Pro I/O
135
Subject to change without notice
