74
MERCEM300Z · Operating Instructions · 8013255 V2.0 · © SICK AG
Technical Documentation
Su
bj
ec
t t
o c
han
ge
w
ith
ou
t n
ot
ic
e
9.1
Compliances and approvals
The technical design of this device complies with the following EU directives
and EN standards:
●
EC Directive: LVD (Low Voltage Directive)
●
EC Directive: EMC (Electromagnetic Compatibility)
Applied EN standards:
●
EN 61010-1: Safety requirements for electrical equipment for measurement, control
and laboratory use
●
EN 61326: Electrical equipment for measurement technology, control technology and
laboratory use - EMC requirements
●
EN 82079-1: Preparation of instructions for use - Structuring, content and presentation -
Part 1: General principles and detailed requirements
●
EN 14181: Calibration of continuously operating emission measuring instruments
●
EN 15267-3: Certification of automated measuring systems - Part 3
●
US EPA conform
9.1.1
Electrical protection
●
Insulation: Protection class 1 according to EN 61010-1.
●
Contamination: The control unit operates safely in an environment up to contamination
level 2 according to EN 61010-1 (usual, non-conductive contamination and temporary
conductivity by occasional moisture condensation).
9.2
Licenses
Exclusion of liability
The firmware of this device was developed using open source software. The user is exclu-
sively responsible for any modifications made to open source components. All warranty
claims shall be invalidated in this case.
The following exclusion of liability applies to the GPL components in relation to the rights
holders: This program is distributed in the hope that it will be of use, but with no guarantee
of this; neither is there any implied guarantee of marketability or suitability for a particular
purpose. For details, see the GNU General Public License.
With regard to the other open source components, we refer you to the exclusions of liability
of the rights holders contained in the license texts on the provided CD.
Software licenses
In this product, SICK uses unmodified open source software and, insofar as required and
where permitted under the relevant license conditions, modified open source software.
The firmware of this device is, therefore, subject to the copyrights listed on the provided
CD. A complete list of the open source programs used and the associated license condi-
tions can be found on the provided CD.
Source codes
The source codes of the open source programs used on this device can be ordered under
the following e-mail address: info.pa@sick.de. Please state “Open Source Software” when
ordering the source code.