Operation
46
MCS100E Operating Instructions 8009504/VYWA7/V3-1/2018-01 © SICK AG
Su
bj
ect
to
ch
an
ge
with
ou
t n
otic
e
5.4
Stopping and starting measurement
5.4.1
STOP, START measurement
Menu:
Specialist: Utilities: Service: STOP, START measurement
• Upon measurement “STOP”, all interfaces (e.g. I/O module boxes) are inactivated.
• Upon measurement “START”, all interfaces are initialized anew and measurement is
started.
5.4.2
Quitting the measurement program
1
To quit the measurement program: Enter <ESC> repeatedly until a screen prompt for
exiting the measurement program is displayed.
2
A password must be entered.
The password input is not displayed on the screen.
3
You are then at DOS level.
4
If required, disable the watchdogs (
).
Definition of password:
The password is identical with the password at “Specialist level”.
To be sure that - after having quit the program - MCS100E is in the basic
condition (important e.g. for configuration of the I/O module boxes):
Boot the MCS100E (<CTRL-ALT-DEL> or switch off/on).
