SICK Master Data Analyzer Operating Instructions Manual Download Page 53

Page: 53 / 128

COMMISSIONING

8020065-ZLP4/2017-08-10|SICK

Subject to change without notice

O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer

6.2.3

Installing SOPAS

Install the latest version of the configuration software from the SICK homepage on the
configuration PC.

1. Open the

www.sick.de

website in the browser.

2. Enter SOPAS into the search field and start the search.
3. Download the latest version of the

SOPAS Engineering Tool

software and save this in

a temporary directory on the configuration PC.

4. Start the installation by double-clicking the

setup.exe

file.

5. Select the

Installation

installation type. The installation is prepared.

6. Select the user language of the wizard.

7. Click

to confirm. The Setup Wizard opens.

8. Follow the Setup Wizard and perform the installation. Depending on the configuration,

a program group is created and an icon is placed on the desktop.

Summary of Contents for Master Data Analyzer

































































































































Search results

Summary of Contents for Master Data Analyzer

Reviews:

Related manuals for Master Data Analyzer

Brands by name

Popular brands

SICK Master Data Analyzer, Operating Instructions Manual

Search results

Summary of Contents for Master Data Analyzer

Reviews:

Related manuals for Master Data Analyzer

Brands by name

Popular brands