3
SYSTEM DESCRIPTION
8020065-ZSP4/2017-08-10|SICK
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
Subject to change without notice
34
3.5.3
Status indicators – IP camera
The IP camera mounted to the measurement gantry for the MDS650/800 is equipped
with a status LED.
Fig. 22: Status indicators – IP camera
LED indicator
Description
LED is off
Connection and normal operation
Green
Permanently green for 10 seconds for normal operation following system
start
Yellow
Permanently on during start-up.
Flashes during firmware update.
Yellow/red
Flashes yellow/red if the network connection is not available or has been
lost.
Tab. 9: Status indicators – IP camera
3.5.4
Status indicators – Display
The display is used to visualize the measurement results as well as for interacting with the
system to troubleshoot error messages.
The screen is controlled by gently touching the respective touch pads. The touch pads on
the touch screen vary according to the operational context.
Fig. 23: Status indicators – Display
NOTE
Notes on the correct use of the touch screen
You are only permitted to touch the touch screen with your fingers. Gently press the touch
pads to operate them; do not apply force.
Do not operate the touch screen with pointed or sharp objects; otherwise, the surface of
the touch screen will become damaged.
