2
SAFETY
8020065-ZSP4/2017-08-10|SICK
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
Subject to change without notice
12
2.4.2
General safety notes
General, recognized safety-related rules and regulations were taken into account in the
design and manufacture of the Master Data Analyzer. However, risks for the user resulting
from the MDA cannot be completely ruled out. The safety notes below must therefore be
observed.
WARNING
Safety notes
Observe the following to ensure the safe use of the system as intended.
•
The notes in these operating instructions (e.g., regarding use, mounting, installation,
or integration into the machine controller) must be observed.
•
All official and statutory regulations governing the operation of the system must be
complied with.
•
The national and international legal specifications apply to the installation and use of
the system, to its commissioning, and to recurring technical inspections, in particular:
– The accident prevention regulations and work safety regulations
– Any other relevant safety regulations
•
The manufacturer and user of the system are responsible for coordinating and
complying with all applicable safety specifications and regulations in cooperation with
the relevant authorities.
•
The checks must be carried out by qualified safety personnel or specially qualified and
authorized personnel and must be recorded and documented to ensure that the tests
can be reconstructed and retraced at any time.
•
These operating instructions must be made available to the operator of the system.
The system operator must be instructed by qualified safety personnel and must read
the operating instructions.
•
Maintenance and repair work may only be performed by trained and authorized
SICK AG service technicians or qualified safety personnel of the customer.
2.4.3
Additional operating instructions
Other operating instructions of the individual components are enclosed along with these
operating instructions.
When working on or with these components, please observe the notes in the operating
instructions of the relevant manufacturer.
