manualshive.com logo in svg

SICK Lector85 Flex Series, Operating Instructions Manual, Page: 7 / 48

Share
Download
SICK Lector85 Flex Series Operating Instructions Manual Download Page 7

1.3

Related applicable documents

Related applicable documents from SICK

Document

Title

Part number Source

Technical
information

VI83I-xxxxxxHx illumination
unit

8027770

www.sick.com/8027770

1.4

Further information

NOTE

Further documentation for the device can be found on the online product page at:

•

www.sick.com/Lector85x

There, additional information has been provided depending on the product, such as:

•

Model-specific online data sheets for device types, containing technical data,
dimensional drawing, and specification diagrams

•

Declarations of conformity and certificates of the product family

•

Dimensional drawings and 3D CAD dimension models of the device types in
various electronic formats

•

Other publications related to the devices described here

•

Publications dealing with accessories

ABOUT THIS DOCUMENT 

1

8027859//2022-06-22 | SICK

O P E R A T I N G   I N S T R U C T I O N S | Lector85x Flex

7

Subject to change without notice

Summary of Contents for Lector85 Flex Series

















































Reviews:

No comments