5.4
Mounting the lens and illumination
Overview
This mounting step is only required for the Lector85x Flex product variant (basic
device).
1
2
3
4
5
6
7
8
1
Spacer, left with electrical connection
2
4 tapped blind holes, M2.5, 5.5 mm deep, for mounting the spacer
3
4 x screws, long
4
Electrical connection for integratable ring illumination unit
5
4 screws, short
6
Integratable illumination unit
7
Spacer, right
8
Light inlet with threaded connection for lens
Important information
CAUTION
Risk of injury due to hot device surface.
The surface of the device can become hot during operation.
•
Before performing work on the device (e.g. mounting, cleaning, disassembly),
switch off the device and allow it to cool down.
•
Ensure good dissipation of excess heat from the device to the surroundings.
MOUNTING
5
8027859//2022-06-22 | SICK
O P E R A T I N G I N S T R U C T I O N S | Lector85x Flex
23
Subject to change without notice