manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 98 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 98

285

or

The 

or

 parameter can be used to select a second condition for deactivating the digital

output.

In order for the digital output to be deactivated, one of the conditions must be met.

•

---

: No second condition selected

•

MATCH 1 CONDITION

: The output is deactivated if the code that has been read corre‐

sponds to the 

MATCH 1 CONDITION

 match code.

•

MULTICODES1 CONDITION

: The output is deactivated if the number of codes that have

been read corresponds to the number specified by the 

MULTICODES1 CONDITION

.

•

TEACH-IN1 CONDITION

: The output is deactivated if the code that has been read corre‐

sponds to the 

TEACH-IN1 CONDITION

 match code.

•

TEACH-IN2 CONDITION

: The output is deactivated if the code that has been read corre‐

sponds to the 

TEACH-IN2 CONDITION

 match code.

286

or Teach-in via function buttons

If the 

or Teach-in via function buttons

 parameter is activated, the match code teach-in

process can also be started by pressing the pushbuttons on the sensor. In this case, no

Activate teach-in mode

 signal is required to prepare for the teach-in process.

287

Online Image

The captured images are displayed on the 

Online Image

 tab.

The display enables you to look at the images in detail and assess the quality of the
shots. By modifying the configuration and comparing each of the images captured, you
can optimize the reading properties and the position of the sensor.

NOTE

The reading results are displayed in the 

Code info box

.

So that the current contrast setting can be evaluated, the identified codes are dis‐
played in different colors:

•

Green (excellent): Contrast between 55% and 100%

•

Yellow (good): Contrast between 20% and 55%

•

Red (poor): Contrast less than 20%

288

Folder name

The 

Folder name

 parameter is used to select the default name for the image folder.

•

SERIAL NUMBER

: The image files are stored in a folder with the same name as the

sensor's serial number.

•

DEVICE NAME

: The image files are stored in a folder with the same name as the value

set for the 

Name

 parameter. Assigning appropriate device names makes it easy to

distinguish between file names when there are several similar devices (e.g., on a
network).

Name

The 

Name

 parameter can be used to define a device name for the sensor. The image

files generated by the sensor are stored in a folder with the same name. Assigning
appropriate device names makes it easy to distinguish between file names when there
are several similar devices (e.g., on a network).

SOPAS PARAMETER OVERVIEW

98

O N L I N E   H E L P | Lector62x

8013778/YPV6/2016-01-14 | SICK

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments