manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 93 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 93

265

Mode

The 

Mode

 parameter is used to define whether the CAN interface should be used, and

if so how.

•

INACTIVE

: Communication via the CAN interface is deactivated.

•

SICK NETWORK

: The device is integrated into a SICK network. On a SICK network, only

SICK reading devices are networked via the CAN bus. This type of device group is
used to scan an object from different perspectives and transmit the reading result
to a host. As far as the host is concerned, the device group functions as an individ‐
ual device.

•

CANOPEN

: The device is integrated into an unspecified CAN fieldbus system. The

SICK reading device operates as a slave under a CANopen client (PLC) and can
communicate with devices from other manufacturers.

NOTE

The master/slave or multiplexer/server operating modes are available for the SICK net‐
work. The operating modes are configured on the 

Network / Interface / IOs

 tab.

266

Module width

The 

Module width

 parameter allows you to choose between an automatic module width

or a user-defined one.

267

Modulo

The 

Modulo

 parameter defines the maximum value for the counter.

As soon as this value is reached, the numbering recommences at 1, which results in
existing images being overwritten. In this way, you can restrict the maximum amount of
memory required by the stored images.

268

Mode

The type of parameter switchover can be selected via the 

Mode

 parameter:

•

AUTOMATIC PARAMETER SWITCHOVER (APS)

: Automatic switchover to an activated 

APS / EPS

parameter set is carried out after a specified number of attempts, which is config‐
ured in the 

NUMBER OF ATTEMPTS

 parameter. One image is captured and decoded by

the sensor per attempt. The activated parameter sets are used one after the other
until the reading operation is successful. The next time a trigger is initiated, the
sensor starts with the parameter set that was last successfully used for reading.

•

EVENT-BASED PARAMETER SWITCHOVER (EPS)

: Switchover to an activated parameter set is

carried out based on an external event, which is configured in the 

EPS SOURCE

parameter.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E   H E L P | Lector62x

93

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments