manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 85 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 85

234

Volume

The 

Volume

 parameter can be used to deactivate the beeper (

OFF

) or to select the vol‐

ume level (

LOUD 

or 

SOFT

).

This allows you to adjust the beeper according to the level of background noise.

235

Teach-in code ID

If the 

Teach-in code ID

 parameter is activated, the code type of the match code is

taught in.

This reduces the likelihood of the code being mistaken for a different one.

236

Teach in code content

If the 

Teach in code content

 parameter is activated, the code content of the match code

is taught in and applied as a condition.

This reduces the likelihood of the code being mistaken for a different one.

237

Teach in code length

If the 

Teach in code length

 parameter is activated, the code length of the match code is

taught in.

This reduces the likelihood of the code being mistaken for a different one.

238

Reading distance

The distance between the sensor and the object is set via the parameters in the 

see

"Reading distance", page 85

 group. The reading distance is used to adapt the focal

range of the sensor to the mounting location.

The value can be entered manually in mm or set automatically via the 

Auto

 button.

NOTE

To avoid disruptive reflections on the object surface, the sensor should be mounted on
a suitable mounting bracket (see mounting information).

The reading distance affects the minimum code resolution and the size of the reading
field:

•

If the reading distance is small, smaller codes can be read.

•

A larger reading distance increases the reading field. The resulting reduction in
image brightness is compensated by means of the brightness control and, if nec‐
essary, by increasing the shutter time.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E   H E L P | Lector62x

85

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments