manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 79 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 79

214

Increment source

The 

Increment source

 parameter is used to select the source of the incremental sig‐

nals:

•

FIXED SPEED

: You can use the 

Fixed speed

 parameter to enter a constant value for

the feed speed of the belt.

•

SENSOR 1

: The incremental signals are expected from a rotary encoder connected at

digital input 1. You configure the digital input using the parameters in the 

Sensor /

Input 1

 group. The maximum input frequency at the input is 300 Hz.

•

SENSOR 2

: The incremental signals are expected from a rotary encoder connected at

digital input 2. You configure the digital input using the parameters in the 

Sensor /

Input 2

 group. The maximum input frequency at the input is 300 Hz.

•

CAN

: The incremental signals are expected via the CAN interface.

•

SOPAS COMMAND

: Appropriate commands are expected to arrive as incremental sig‐

nals. The commands can be generated by an external control (PLC), for example,
and transmitted to the sensor at defined intervals.

215

Length of Input-Data

The length of the input data for the PLC or master is determined via the 

Length of Input-

Data

 parameter.

216

Internal

The 

Internal

 parameter is used to adjust the internal illumination of the sensor in line

with the local lighting situation of the application.

•

OFF

: If external illumination is used, the internal illumination can be deactivated.

•

LEFT / RED

 (type-dependent): This illumination type permits the maximum contrast

for codes in the wavelength spectrum between blue and green.

•

RIGHT / BLUE

 (type-dependent): This illumination type offers the maximum contrast

for codes in the wavelength spectrum between green and red, and can improve
the reflective properties of codes on metal surfaces.

•

BOTH / RED + BLUE

 (type-dependent): The combination of both illumination types

offers the maximum contrast for black codes. The reading area is illuminated uni‐
formly with increased light output. This setting is recommended for large reading
distances and when the background color is unknown or subject to change.

•

BOTH / INFRARED

 (type-dependent): The advantage of the infrared illumination type is

that the light is invisible to humans, meaning that no disruptive light sources are
emitted by the device. The code contrast achieved by the illumination is depend‐
ent on the material properties and surface condition of the code and must be
tested.

NOTE

Some parameter values are not supported by all device types.

By setting the internal illumination, you can achieve optimum illumination of the read‐
ing field and a higher read rate.

217

Internal memory (permanent)

If the 

Internal memory (permanent)

 parameter is activated, the captured images are

stored permanently in the sensor's internal memory. The images are retained even after
the device is switched off.

The amount of internal memory available is 120 MB. The stored images can be trans‐
ferred to the PC and deleted manually.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E   H E L P | Lector62x

79

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments