manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 73 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 73

192

Stored Images

Stored images can be displayed in the main view of the 

Stored Images

 group.

The images saved in the sensor or on the microSD memory card can be transferred to
the PC, where they can be stored in a database, for example, and opened when
required. The data (images, .xml files, etc.) stored in the sensor or on the microSD
memory card can also be deleted.

NOTE

By comparing and evaluating the images that have been captured, it is possible to ana‐
lyze which codes were not identified and whether faulty code structures prevented
reading from taking place, for example. Click on the smaller images on display in the

Image sequence

 to display them in the main view. The relevant code data is listed in

the 

Code info box

. By right-clicking, you can display the date and time when the images

were captured, which makes it easier to attribute them correctly.

So that the current contrast setting can be evaluated, the identified codes are dis‐
played in different colors:

•

Green (excellent): Contrast between 55% and 100%

•

Yellow (good): Contrast between 20% and 55%

•

Red (poor): Contrast less than 20%

193

Stored Log Files

Reading results from different interfaces can be written to the internal memory or the
micro SD card via the 

Stored Log Files

 settings.

This function enables the reading results to be recorded without an external PC so that
they can be evaluated later.

194

Good Read / No Read file prefix

If the 

see "Good Read / No Read file prefix", page 73

 parameter is activated, an appro‐

priate prefix is added to the name so that the images can be analyzed more easily
according to the reading result (

GOOD READ

 or 

NO READ

).

195

Good Reads

The 

Good Reads

 display field shows how many triggers resulted in the Good Read con‐

dition being met.

The triggers involved in setting up the sensor are not included in the statistics.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E   H E L P | Lector62x

73

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments