manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 58 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 58

159

Ethernet Aux Port

The 

Ethernet Aux Port

 group contains the parameters for configuring the Ethernet aux

interface. The Ethernet aux interface is typically used for configuring and analyzing the
sensor.

Output Format

The 

Output Format

 parameter is used to select the output format for the interface.

•

NO OUTPUT

: No data is output via this interface.

•

READING DIAGNOSIS

: This interface is used to output a diagnosis string for each read‐

ing gate.

•

OUTPUT FORMAT 1

: Data that is output via this interface is formatted in line with the

configuration in the 

Output Format 1

 group.

•

OUTPUT FORMAT 2

: Data that is output via this interface is formatted in line with the

configuration in the 

Output Format 2

 group.

For the reading diagnosis, the following information is combined in a diagnosis string
for each reading gate:

•

TT: Reading gate duration in ms

•

OTL: Trigger length in mm

•

CC: No. of codes per reading gate

•

FC: Focal position in mm

•

Code content

•

Code type

For 1D Symbologies

•

CL: Code length

•

RSD1DV: Ratio of scans to decoded scans (reading reliability) in %

For 2D Symbologies

•

SZ: Symbol size

•

RES: Cell resolution in pixels

•

CTV: Symbol contrast in %

•

UECV: Decodability (unused error correction) in %

•

MC: Number of multireads per code

Server / Client

The 

Server / Client

 parameter is permanently set to the 

CLIENT 

value and cannot be

changed.

IP port

The 

IP-Port

 parameter can be used to adjust the port number for the Ethernet aux inter‐

face (default value: 2111) in line with the connected PC or control (PLC).

160

Ethernet Host

If the 

Ethernet Host

 parameter is activated, the results from the Ethernet host interface

are written to the save destination.

161

Ethernet Host Port

The 

Ethernet Host Port

 group contains the parameters for configuring the Ethernet host

interface. The Ethernet host interface is typically used for communication with the con‐
trol.

SOPAS PARAMETER OVERVIEW

58

O N L I N E   H E L P | Lector62x

8013778/YPV6/2016-01-14 | SICK

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments