manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 46 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 46

104

Code Quality

The code evaluation settings are made on the 

Code Quality

 tab. Code evaluations

based on various standards can be used to compare and check reading results from
different sensors.

105

Separate codes depending on position

If the 

Separate codes depending on position

 parameter is activated, codes of the same

type and with identical content are distinguished from one another according to their
position on the object.

For this to take place, there must be a definable minimum distance (

Code distance

)

between the identical codes on the object.

106

Label timeout active

If the 

Label timeout active

 parameter is activated, you can define how much time has to

elapse before an identical code may be output again.

107

Code surrounded by patterns

If the 

Code surrounded by patterns

 parameter is activated, any lines (e.g., printed con‐

ductors on a PCB) around the code are disregarded during evaluation.

This keeps the reading operation focused on the code elements and reduces the
decoding time.

NOTE

When the function is activated, poor quality codes tend to be ignored.

SOPAS PARAMETER OVERVIEW

46

O N L I N E   H E L P | Lector62x

8013778/YPV6/2016-01-14 | SICK

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments