manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 43 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 43

95

Code appearance

The decoding process can be limited to mirrored or non-mirrored codes using the 

Code

appearance

 parameter, which reduces the decoding time.

•

NORMAL

: Only non-mirrored codes can be decoded correctly.

•

MIRRORED

: Only mirrored codes that have been captured from below through a glass

pane, for example, can be decoded correctly. This involves reversing the images
that have been captured by mirroring them again before they are decoded.

•

BOTH

: Both mirrored and non-mirrored codes are read.

96

Code distance

The 

Code distance

 parameter is used to define the minimum distance for distinguish‐

ing between identical codes.

In this case, the system only distinguishes between codes of the same type and with
identical content if the distance between them on the object is equal to or greater than
the specified 

Code distance

.

97

Code format

The 

Code format

 parameter is used to select the format (Data Matrix code symbology)

for outputting data:

•

ECC200

: The data is output in the standard data format.

•

GS1

: The data is output in the special GS1 data format. User-specific characters

can be defined for the FNC1 character (control character at the start of the code)
and for the separator (control character within the code). This means, for example,
that a line break (CR, LF) can be inserted in the data string after each 

APPLICATION

IDENTIFIER

.

98

Code background

The decoding process can be limited to codes with a light or dark background color
using the 

Code background

 parameter, which reduces the decoding time.

•

WHITE

: Only dark codes on a light background are read.

•

BLACK

: Only light codes on a dark background (inverted codes) are read.

•

BOTH

: Both dark codes on a light background and light codes on a dark background

(inverted codes) are read.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E   H E L P | Lector62x

43

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments