manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 42 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 42

92

Code 128 Family

If the 

Code 128 Family

 parameter is activated, decoding is enabled for the activated

Code 128

 and 

EAN 128

 code types at the same time. (This requires the 

Pharmacode

code type to be deactivated.) The configuration tab for the corresponding code types
can be seen and opened in SOPAS ET.

NOTE

As only activated code types are processed, you can increase the processing speed by
deactivating the code types that are not being used.

93

Code 39

If the 

Code 39

 parameter is activated, decoding is enabled for the relevant code type.

NOTE

As only activated code types are processed, the processing speed can be increased by
specifically activating/deactivating the necessary code types.

•

Code name: 

Code 39

 (two-value)

•

Character set: 43 alphanumeric characters (10 digits, 26 letters, 7 special charac‐
ters)

•

Structure: 9 code elements (5 bars, 4 gaps) – 3 wide and 6 narrow

•

Intrinsic safety: Average

•

Spatial requirements: High

•

Standard: ISO/IEC 16388

•

Areas of application: Parcel and postal service

94

Code 93

If the 

Code 93

 parameter is activated, decoding is enabled for the relevant code type.

NOTE

As only activated code types are processed, the processing speed can be increased by
specifically activating/deactivating the necessary code types.

•

Code name: 

Code 93

 (4-value)

•

Character set: 43 alphanumeric characters (10 digits, 26 upper-case letters, 7
special characters: space, -, ., $, /, +, and %)

•

Intrinsic safety: Average

•

Spatial requirements: Low

•

Standard: ISO/IEC 16388

•

Areas of application: Parcel and postal service

SOPAS PARAMETER OVERVIEW

42

O N L I N E   H E L P | Lector62x

8013778/YPV6/2016-01-14 | SICK

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments