manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 34 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 34

66

Image Capturing Mode

Two image capturing processes are available under the 

Image Capturing Mode

 parame‐

ter:

•

CONTINUOUS

: Continuous image capturing by the sensor at the set image frequency.

If the image frequency was not set manually, images are captured at 25 or 60

 

Hz

depending on the device type.

•

INDIVIDUAL IMAGES

: Only the number of images set under the 

NUMBER OF IMAGES

 param‐

eter are captured regardless of the reading interval length.

The 

CONTINUOUS

 image capturing mode is the default setting and suitable for most appli‐

cations. It is recommended that 

INDIVIDUAL IMAGES

 capturing mode is used for fast appli‐

cations with small gaps between objects. The decoding time is considerably reduced
due to the limited number of images captured.

67

Image output dominant over trigger

The 

Image output dominant over trigger

 parameter defines a processing sequence for

outputting images and accepting an object trigger. If this parameter is activated, the
diagnostic images are transmitted in full before the device accepts and processes the
object trigger for the subsequent reading process. If this parameter is deactivated, a
trigger signal is processed by the device anyway and any image output operation that
has not yet been completed is interrupted.

For the purpose of editing the reading device, image output can be prioritized to deter‐
mine what the device detects within a reading gate. If this parameter is activated, you
can check the object trigger interval and length of the reading process. We only recom‐
mend prioritizing the image output for normal operation in exceptional circumstances in
the case of applications where image output is more important than continuous object/
code detection.

68

Image region of interest

The 

Image region of interest

 parameter allows you to focus the reading field on the rele‐

vant areas.

Reducing the size of the reading field makes the decoding time shorter and increases
the frame rate. This enables faster object speeds to be achieved.

NOTE

To change the size of the reading field, adjust the red marking by dragging and drop‐
ping or by entering the four % values.

SOPAS PARAMETER OVERVIEW

34

O N L I N E   H E L P | Lector62x

8013778/YPV6/2016-01-14 | SICK

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments