SICK Lector62 Series, Online Help Manual, Page: 31 / 131

53 Condition for image storing
The Condition for image storing parameter is used to select the condition that must be
met for images to be stored for diagnostic purposes.
•
GOOD READ
: Only images resulting from a successful code reading operation are
stored.
•
NO READ
: Only images resulting from an unsuccessful code reading operation are
stored.
•
ALL
: All captured images are stored.
•
MATCH 1 CONDITION
: The captured images are only stored if the code that has been
read corresponds to the
MATCH 1 CONDITION
match code.
•
MULTICODES1 CONDITION
: The captured images are only stored if the number of codes
that have been read corresponds to the number specified by the
MULTICODES1 CONDI‐
TION
.
•
TEACH-IN1 CONDITION
: The captured images are only stored if the Match-code teach-in
1 condition is met.
•
TEACH-IN2 CONDITION
: The captured images are only stored if the Match-code teach-in
2 (Additional) condition is met.
54 Condition for Good Read
The Condition for Good Read list box is used to define the condition that must be met in
order for a read operation to be evaluated as "good" (
GOOD READ
).
•
USE MIN./MAX. NUMBER OF CODES
: Depending on how the Check min. number of valid
codes and Check max. number of valid codes parameters are configured, a read
operation is evaluated as "good" (
GOOD READ
) if the number of codes read falls
between the minimum and maximum values specified.
•
MATCH1 CONDITION
: The read operation is evaluated as "good" (
GOOD READ
) if the code
that has been read corresponds to
MATCH CODE MATCH 1
.
•
MULTICODES1 CONDITION
: The read operation is evaluated as "good" (
GOOD READ
) if the
number of codes that have been read corresponds to the specified number.
•
TEACH-IN1 CONDITION
: The read operation is evaluated as "good" (
GOOD READ
) if the
code that has been read corresponds to
MATCH CODE TEACH-IN 1
.
•
TEACH-IN2 CONDITION
: The read operation is evaluated as "good" (
GOOD READ
) if the
code that has been read corresponds to
MATCH CODE TEACH-IN 2
.
55 Invert condition
A condition can be inverted using the Invert condition parameter. Inverting a condition
allows all code content to be approved except the taught-in match code content.
With this function, it is possible to prevent a particular product from leaving the produc‐
tion line.
SOPAS PARAMETER OVERVIEW
8013778/YPV6/2016-01-14 | SICK O N L I N E H E L P | Lector62x 31
Subject to change without notice