manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 23 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 23

or

The 

or

 parameter can be used to select a second condition for deactivating the digital

output.

In order for the digital output to be deactivated, one of the conditions must be met.

•

---

: No second condition selected

•

MATCH 1 CONDITION

: The output is deactivated if the code that has been read corre‐

sponds to the 

MATCH 1 CONDITION

 match code.

•

MULTICODES1 CONDITION

: The output is deactivated if the number of codes that have

been read corresponds to the number specified by the 

MULTICODES1 CONDITION

.

•

TEACH-IN1 CONDITION

: The output is deactivated if the code that has been read corre‐

sponds to the 

TEACH-IN1 CONDITION

 match code.

•

TEACH-IN2 CONDITION

: The output is deactivated if the code that has been read corre‐

sponds to the 

TEACH-IN2 CONDITION

 match code.

Logic

The 

Logik

 parameter is used to select the polarity of the digital output.

•

NOT INVERTED

: If this option is activated, the digital output switches from Low (0) to

High (1).

•

INVERTED

: If this option is activated, the digital output switches from High (1) to Low

(0).

Control system

The 

Control system

 parameter allows you to choose between a configuration based on

length units and a configuration based on time units.

•

DISTANCE-CONTROLLED

: The values for the 

Länge

 parameter are entered in mm.

•

TIME-CONTROLLED

: The values for the 

Länge

 parameter are entered in ms.

Length

If the 

Inactive

 parameter is set to the 

TIMER/TRACKING

 condition, the 

Length

 parameter

can be used to specify how long the digital output should remain activated. The unit
can be selected via the 

Control system

 parameter.

42

Output / Result 3

The 

Output / Result 3

 group contains the parameters for adjusting digital output 3.

NOTE

Digital outputs 3 and 4 are not available via the 15-pin D-Sub port on the CDB620 or
CDM420 connection module. They can only be utilized if a 17-pin open-ended cable is
used.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E   H E L P | Lector62x

23

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments