manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 17 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 17

18

General Match-code teach-in settings

The 

General Match-code teach-in settings

 group contains the parameters for teaching

in the match codes.

The two match codes are stored in the 

Match-code teach-in 1

 and 

Match-code teach-in

2 (Additional)

 groups and can be subsequently customized.

19

Alpha

The device's Alpha angle in relation to the code and trigger position is defined under
the 

Alpha

 parameter.

Example: Angle set to 90° or 270°. The reading is taken perpendicular to the convey‐
ing direction.

20

Alternate Score

If the 

Alternate Score

 parameter is activated, the calculation of the score value is opti‐

mized.

This parameter is used to increase the score values of the Alternate Classifier.

NOTE

The optimization option is only available for the Alternate Classifier.

21

Change camera settings

If the 

Change camera settings

 parameter is activated, the brightness and contrast are

adjusted via the 

AUTO-SETUP

 function. This function is accessed by pressing the pushbut‐

tons on the sensor.

22

Change code settings

If the 

Change code settings

 parameter is activated, the code settings for the 

DATA MATRIX

code type are adjusted via the 

AUTO-SETUP

 function. This function is accessed by pressing

the pushbuttons on the sensor.

23

Change reading distance

If the 

Change reading distance

 parameter is activated, the reading distance is adjusted

via the 

AUTO-SETUP

 function. This function is accessed by pressing the pushbuttons on

the sensor.

24

Number of Images

The 

Number of Images

 parameter is used to set the number of images that are cap‐

tured in 

INDIVIDUAL IMAGES

 capturing mode. The number of images captured depends on

the reading gate length.

25

Number of mapped RPDO bytes

The 

Number of mapped RPDO bytes

 parameter defines the scope of the receive proc‐

ess data objects (RPDOs) that can be received by the script program.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E   H E L P | Lector62x

17

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments