SICK Lector62 Series Online Help Manual Download Page 14

Page: 14 / 131

2D Components

If the

GS1 DataBar

parameter is activated, decoding is activated for the

activated code types. (This requires the

GS1

DataBar

code type to be deactivated.)

NOTE

As only activated code types are processed, you can increase the processing speed by
deactivating the code types that are not being used.

2D Increase Performance

It is possible to optimize the decoding process for 2D codes via the parameters in the

2D Increase Performance

group. The parameters can be used to eliminate interference,

thereby increasing device performance.

Adapting the settings to suit the application reduces the decoding time and increases
both reading reliability and the readability of low-contrast, 2D codes.

Add-on

The

Add-on

parameter allows you to adjust how the extended code structure is handled

(additional information generally found on magazines).

•

NONE

: There is no extended code structure available within the code.

•

ACTIVE

: There is an extended code structure available within the code.

•

REQUIRED

: Only codes with an extended code structure are read.

Add-on length

The

Add-on length

parameter is used to define the length of the extended code struc‐

ture.

•

2 CHARACTERS

: A 1

•

5 CHARACTERS

: A 1 B 2 C

•

2 OR 5 CHARACTERS

: A 1 or A 1 B 2 C

Address

The address of the image server to which the images for the SICK Visualization Platform
are to be sent is specified under the

Address

parameter.

Addressing mode

The

Addressing mode

parameter is used to specify whether the IP address of the sen‐

sor should be defined manually (

STATICALLY

) or assigned by a server (

DHCP

SOPAS PARAMETER OVERVIEW

O N L I N E H E L P | Lector62x

8013778/YPV6/2016-01-14 | SICK

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Search results

Summary of Contents for Lector62 Series

Reviews:

SICK Lector62 Series, Online Help Manual, Page: 14 / 131

Search results

Summary of Contents for Lector62 Series

Reviews: