manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 125 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 125

384

UPC E

If the 

UPC E

 parameter is activated, decoding is enabled for the relevant code type.

NOTE

As only activated code types are processed, the processing speed can be increased by
specifically activating/deactivating the necessary code types.

•

Code name: 

UPC E

 (Universal Product Code) (4-value)

•

Character set: 8 numeric characters

•

Structure: System identifier (always 0), 2 characters for country prefix, 4 charac‐
ters for the manufacturer and article, 1 character as the check digit

•

Intrinsic safety: High

•

Spatial requirements: Low

•

Standard: DIN/EN 797

•

Areas of application: Foodstuffs and consumer goods in the USA and Canada

385

UPC E extended

If the 

UPC E extended

 parameter is activated, 8-character codes based on the 

UPC E

symbology are automatically converted into 12-character codes. (This requires the 

Phar‐

macode

 code type to be deactivated.)

386

Varying Text Size

Activating the 

Varying Text Size

 parameter enables texts that contain characters of

slightly varying heights to be read.

This parameter increases the quality and stability of segmentation for certain texts.

387

Connection timeout

The 

Connection timeout

 parameter is used to define a timeout in ms for establishing

the connection between the device and the time server. After a connection interruption
or restart, the device attempts to establish a connection to the server at the predefined
intervals.

388

Comparison with Ideal Character

If the 

Comparison with Ideal Character

 parameter is activated, the score values are cal‐

culated based on a comparison with the selected ideal characters.

All the characters that have been taught in using the OCR wizard are displayed in a
character table. Well-printed characters can be highlighted as ideal characters in the
table. If the 

COMPARISON WITH IDEAL CHARACTER

 parameter is activated, the score values are

calculated based on a comparison with this ideal character.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E   H E L P | Lector62x

125

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments