manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 121 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 121

367

Condition Timeout

If the 

Data transmission point

 parameter is set to the value 

AS SOON AS POSSIBLE

, the 

Con‐

dition Timeout

 parameter can be used to define how much time must elapse before the

data is output again. After this time, the data is output again, provided that the data
output condition (

Output Condition

) is met.

The unit can be selected via the 

Output delay

 parameter.

368

Label Timeout

If the 

Data transmission point

 parameter is set to the value 

AS SOON AS POSSIBLE

, the

Label Timeout

 parameter can be used to define how much time must elapse before the

data is output again. After this time, the data is output again, provided that the code is
within the reading area.

The unit can be selected via the 

Output delay

 parameter.

369

Timeout Command Response

The 

Timeout Command Response

 parameter defines an interval in ms during which a

response to a SOPAS command remains available in the object directory for upload by
an SDO client. Once this interval has elapsed, the command response is discarded.

When responses to SOPAS commands are transmitted, the device response is stored in
the object directory and downloaded by the SDO client. A timeout must be specified for
the SDO client upload.

370

Timeout ReadResult

The 

Timeout ReadResult

 parameter defines an interval in ms during which a reading

result remains available in the object directory for upload by an SDO client. Once this
interval has elapsed, the reading result is discarded.

If the reading results are transmitted via a service data object (SDO), the reading
results are stored in the object directory and downloaded by the SDO client. A timeout
must be specified for the SDO client upload.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E   H E L P | Lector62x

121

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments