manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 118 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 118

355

Beeper

The event that activates the beeper is selected via the 

Beeper

 parameter.

•

GOOD READ

: The beeper sounds if the read operation was successful.

•

NO READ

: The beeper sounds if the read operation was unsuccessful.

•

TEACH-IN 1 OK

: The beeper sounds if the 

MATCH CODE TEACH-IN 1

 has been successfully

taught in.

•

TEACH-IN 1 NOK

: The beeper sounds if the 

MATCH CODE TEACH-IN 1

 could not be success‐

fully taught in.

•

TEACH-IN 2 OK

: The beeper sounds if the 

MATCH CODE TEACH-IN 2

 has been successfully

taught in.

•

TEACH-IN 2 NOK

: The beeper sounds if the 

MATCH CODE TEACH-IN 2

 could not be success‐

fully taught in.

•

MATCH 1 CONDITIONS

: The beeper sounds if the code that has been read corresponds

to the 

MATCH 1 CONDITION

 match code.

•

MULTICODES1 CONDITION

: The beeper sounds if the number of codes that have been

read corresponds to the number specified by the 

MULTICODES1 CONDITION

.

•

TEACH-IN1 CONDITIONS

: The beeper sounds if the code that has been read corre‐

sponds to the 

TEACH-IN1 CONDITION

 match code.

•

TEACH-IN2 CONDITIONS

: The beeper sounds if the code that has been read corre‐

sponds to the 

TEACH-IN2 CONDITION

 match code.

356

SVP

The SVP data output can be activated in the 

SVP

 group.

The SVP (SICK Visualization Platform) is a dynamic database used to monitor, analyze,
and evaluate all the information, including camera images and videos that are captured
using automatic SICK data collection systems.

SOPAS PARAMETER OVERVIEW

118

O N L I N E   H E L P | Lector62x

8013778/YPV6/2016-01-14 | SICK

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments