SICK Lector62 Series Online Help Manual Download Page 111

Page: 111 / 131

336

Save Destination

The

Save Destination

group contains the parameters for saving the image files. The

save destination determines the media that is used to store the images.

NOTE

The storage media selection affects the storage times. Saving the data to the internal
memory or onto a microSD memory card takes significantly longer than other storage
options. It is therefore recommended to select the

INTERNAL MEMORY (PERMANENT)

storage

option or the

SOPAS (PC)

storage option at high reading speeds. Only one storage option

should be activated at high reading speeds.

337

Stacked Symbologies Active

If the

GS1 DataBar

parameter is activated, decoding is activated for the

activated code types. (This requires the

GS1

DataBar

code type to be deactivated.)

NOTE

As only activated code types are processed, you can increase the processing speed by
deactivating the code types that are not being used.

338

Standard gateway

The

Standard gateway

parameter is used to specify the IP address of a gateway to

implement the network protocol. Before this can happen, a connection must be estab‐
lished with the sensor at the

SERVICE EMPLOYEE

user level.

NOTE

parameters can be changed via the connection wiz‐

ard if the

AUTHORIZED CUSTOMER

user level is accessed.

339

Stacked Symbologies

The

Stacked Symbologies

group contains all the parameters for configuring what are

known as "stacked symbologies" (multiple bar codes that are stacked one on top of the
other in rows and all have the same start and end characters).

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E H E L P | Lector62x

111

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Search results

Summary of Contents for Lector62 Series

Reviews:

SICK Lector62 Series, Online Help Manual, Page: 111 / 131

Search results

Summary of Contents for Lector62 Series

Reviews: