manualshive.com logo in svg

SICK Lector62 Series, Online Help Manual, Page: 109 / 131

Share
Download
SICK Lector62 Series Online Help Manual Download Page 109

324

Serial AUX Interface

The 

Serial AUX Interface

 parameter specifies which fieldbus gateway is to be used on

the serial auxiliary interface provided by the CDM4xx connection module.

•

NONE

: No connection module with a fieldbus gateway is connected.

•

PROFIBUS DP

: The CMD4xx connection module is equipped with a Profibus CMF card

that acts as a gateway into the Profibus DP fieldbus system.

•

DEVICENET

: The CMD4xx connection module is equipped with a DeviceNet CMF card

that acts as a gateway into the DeviceNet fieldbus system.

NOTE

To use the interface, you must move the switch on the gateway to the AUX position.

325

Serial host interface

The 

Serial host interface

 parameter specifies which fieldbus gateway is to be used on

the serial host interface provided by the CDM4xx connection module.

•

NONE

: No connection module with a fieldbus gateway is connected.

•

PROFIBUS DP

: The CMD4xx connection module is equipped with a Profibus CMF card

that acts as a gateway into the Profibus DP fieldbus system.

•

DEVICENET

: The CMD4xx connection module is equipped with a DeviceNet CMF card

that acts as a gateway into the DeviceNet fieldbus system.

•

PROFINET IO

: The device is connected to a CDM425 connection module with a PROFI‐

NET IO gateway, which integrates the reading device into the PROFINET IO Indus‐
trial Ethernet standard.

NOTE

To use the interface, you must move the switch on the gateway to the AUX position.

326

Serial Host

If the 

Serial Host

 parameter is activated, the results from the serial host interface are

written to the save destination.

327

Server / Client

The 

Server / Client

 parameter is used to select what function the sensor should per‐

form within a network.

•

SERVER

: Within a network, the sensor functions as a server.

•

CLIENT

: Within a network, the sensor is subordinate to a server. The server is

defined via the 

Server Address

 parameter.

328

Server Address

The 

Server Address

 parameter is used to define the IP address of the server to which

the sensor is subject within a network.

Enable heartbeat

If the 

Enable heartbeat

 parameter is activated, what happens at regular intervals

(

Heartbeat-Intervall

) is that a signal is output via the interface. In this way, the availabil‐

ity of the sensor can be checked via the interface.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E   H E L P | Lector62x

109

Subject to change without notice

Summary of Contents for Lector62 Series




































































































































Reviews:

No comments