Operating Instructions
Chapter
7
TPS
8021799/2017-09-26
Operating Instructions | SICK
59
Subject to change without notice
Operation
7.1.1
The operator display in the operating mode for truck drivers
The following functions are available in the operating mode for truck drivers:
Function/symbol
Meaning
Black Spot Target Icon
In order to set or remove a black spot target at the current
area.
Inside black spot areas, the driver may also disable all
acoustic warnings. Therefore, the speaker-icon is shown
while the truck is inside the black spot area.
Also see chapter
8.4.4 Up- and downloading of GPS black
for the description of setting and removing black
spots via the web interface.
Day/night mode switching
Swaps (inverts) the screen colors: Black becomes white
and white becomes black. This adjusts the display to the
current light conditions.
When the system starts, the inverted display (white on
black) is always preset.
It has no function in the operating mode for the truck
driver.
Tab. 16: Functions in the operating mode for truck drivers
7.2
Forward Driving
While the gear selector is in neutral “N” or one of the forward gear positions, the main
operator display shows the truck with configured warning zones in bird’s eye view. In this
view, zone violations are shown with a colored warning zone (green, yellow or red) and a
pulsating red dot at the position of the violation.
Two green blocks to the left and right of the truck on the display are indicating that the
truck is in lane.
In order to be in lane and active the road departure warning, the truck needs to detect the
bund wall for a certain time and speed.
Note