manualshive.com logo in svg

SICK IVC-2D, Reference Manual, Page: 31 / 253

Share
Download
SICK IVC-2D Reference Manual Download Page 31

Reference Manual 

Chapter 

3

 

IVC-2D

 

  

©

SICK AG • Advanced Industrial Sensors • www.sick.com • All rights reserved 

31 

Handling the Emulator 

Emulator 

Click 

Browse…

 and select a folder containing recorded images. 

The Emulator camera type must be of the same type that was 
used when recording the images. 

Click 

OK

. 

 

3.2.2

 

Basics 

To enable the 
Emulator 

Choose 

Emulator 

Æ

 Enable…

 from the IVC Studio menu bar.  

The Emulator settings dialog box is opened. 

Select which camera type to emulate from the drop-down list. 

Enter a numeric camera ID. The ID must be unique within the 
Product. Maximum length is 9 digits. 

Click 

Browse…

 and select a folder containing pre-recorded 

images. The Emulator camera type must be of the same type 
that was used when recording the images. 

Click 

OK

. 

To disable the 
Emulator 

Choose 

Emulator 

Æ

 Disable

 

from the IVC Studio menu bar. 

The Emulator disappears from the list of Devices. 

To enable the 
Emulator automa-
tically 

Choose 

Emulator 

Æ

 Settings…

 from the IVC Studio menu bar.  

The Emulator settings dialog box is opened. 

Tick 

Enable Emulator when launching IVC Studio

 and click 

OK

. 

The Emulator is now automatically enabled when starting IVC 
Studio. 

To change the 
Emulator settings 

Choose 

Emulator 

Æ

 Settings…

 from the IVC Studio menu bar. 

If 

Type,

 

ID,

 

Number of image banks

 or 

Number of profile banks

 

is changed, the Emulator will be restarted. 

To access the flash 
disk of the Emula-
tor  

The flash disk of the Emulator is found on the PC under My 
Documents (Documents in Vista) for the current user. The default 
path to the Emulator flash is:  

My Documents\SICKIVP\SmartCameras\IVC Studio x.x\ Emula-
tor\flash 

 

3.2.3

 

Using the Grab and the Grab Setup Tools 

Each time the Grab tool is executed a new image is read from the image source. The 
name of this image file is displayed as a result parameter of the Grab step, and the Grab 
Setup parameters saved in the image file are used to update the image banks.  

The program thus works as if a Grab Setup step with these settings were executed. 

3.2.4

 

Using Old Images in an Emulated 3D Camera 

It is possible to use images that are captured with a version of IVC Studio that does not 
support the Emulator. The Grab Setup tool then needs to be executed with the same 
settings as were used when capturing the images, since the images do not contain any 
setup information. 

To use old images 
in an emulated 3D 
camera 

Choose 

Emulator 

Æ

 Settings…

 from the IVC Studio menu bar, 

select the desired image source folder, and click 

OK

. 

Configure a Grab Setup step with the same settings that were 
used when the images were captured. 

Summary of Contents for IVC-2D






























































































































































































































































Reviews:

No comments