SICK IOLG2PN-03208R01-PROFINET Operating Instructions Manual Download Page 36 | Manualshive

Page: 36 / 50

SICK IOLG2PN-03208R01-PROFINET Operating Instructions Manual Download Page 36

Operating instructions IO-Link Master IOLG2PN-03208R01 – PROFINET

Operation via the web server

36

© SICK AG • Presence Detection • Subject to change without notice • 8018665.10RD

8 Operation via the web server

8.1

General information

The IO-Link Master has an integrated interface for a web server.
You can use the web server to carry out the following tasks:
•  Call up detailed information on the current status of the IO-Link Master.
•  Call up information about connected IO-Link devices.
•  Configure connected IO-Link devices.
Make sure that the device is correctly integrated into the network. To set

up a connection with the web server, enter the IP address of the IO-Link

Master into the address bar in the browser. A welcome page appears.
Use the current version of Internet Explorer and deactivate the proxy server.

8.2

Views

The web server comprises the following views:
•  Welcome page
•  Home
•  Diagnostic process
•  Device properties
•  Diagnostic module
•  Configuration
•  Contact

«
...
34
35
36
37
38
...
»

Summary of Contents for IOLG2PN-03208R01-PROFINET



















































Reviews:

No comments