INSTALLATION
4
8024534 / / 2019-08-19
Operating Instructions | InspectorP Rack Fine Positioning
15
Chrome). It is not necessary to install software. The device must be supplied with volt-
age and connected to the PC via the Ethernet interface in order to use the SOPASair
web server.
Starting SOPASair
1.
Start web browser (recommendation: Google Chrome).
2.
Enter the device IP address into the address line.
The SOPASair user interface appears.
4.1.3
Saving parameter set
The currently valid parameter set can be backed up using SICK AppManager. The com-
plete environment of the device is then available if support is necessary.
Saving on the PC (back-up)
1.
In the SICK AppManager, in the
Device
window, click on the
Backup
button.
The
Backup Apps and Data
window opens.
2.
Fill out the
Name
,
Version
and
Filename
fields.
3.
Select the path for data back-up.
4.
Select all available options.
5.
To run the back-up, click on the
Backup
button in the
Backup Apps and Data
win-
dow.
Saving on a microSD memory card (cloning)
NOTICE
Risk of damage to the memory card!
▸
To avoid damaging the memory card, make sure the device is de-ener-
gized when you insert or remove the card. For this purpose, disconnect
the device from the supply voltage accordingly.
The card slot for the microSD memory card is located at the top of the device at the
rear under the hinged cover.
1.
Switch off the supply voltage to the device.
Figure5: “Backup Apps and data” window