SICK IDM series Operating Instructions Manual Download Page 2

Page: 2 / 134

General Remarks

Operating Instructions

IDM corded & IDM Bluetooth

8017159/142O/2019-05-23

General Remarks

Further information on the IDM Hand-held scanners can be found on the internet on the IDM product page at

www.sick.com

•

Detailed technical data in the online data sheet

•

Overview of accessories

•

Configuration software IDM Set Up Tool

•

EC Declaration of conformity

•

Identification solutions product catalog

•

Product information Hand-held scanners

Print out this manual

If you want to print out this manual please ensure that the original size is remained and the print out is of
good quality. Otherwise the configuration codes contained in this manual may be distorted and cannot be
scanned anymore.

Regulatory

EN61000-3-2/ EN61000-3-3

EN60950-1, EN61000-6-3,
EN61000-6-2

KN22, KN24 (KN61000-2,-3,-4,-5,-6,-8,-11)

Clause 2, Article 58-2 of Radio Waves Act

Part 15B, Part 15C

V-3/2011.04, TECHNICAL REQUIREMENTS,
Class B ITE

CNS13438, CNS14336

MIC T401

AS/NZS CISPR 22:2009 Class B

LED Eye Safety

IEC62471 Exempt group

LP0002

Laser Eye Safety

IEC60825-1 Class 1

Trademark

Adobe™ Reader™ is a trademark of Adobe Systems Incorporated.

Relevant for IDM Corded Hand-held scanners with power supply.

At the presence of high frequency interference in the frequency range of 15 MHz to 50 MHz there may be performance restrictions.

Relevant for IDM Corded Hand-held scanners

Relevant for IDM Bluetooth Hand-held scanners

Summary of Contents for IDM series






































































































































Search results

Summary of Contents for IDM series

Reviews:

SICK IDM series, Operating Instructions Manual, Page: 2 / 134

Search results

Summary of Contents for IDM series

Reviews: