Chapter
7
Operating Instructions
ICR890 High-end CCD Camera System
92
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8011325/0000/2006-10-24
Maintenance
7.2.4
Cleaning further optical effective surfaces
Depending on the system equipment, further sensors with optical effective surfaces can be
installed (e. g. photoelectric reflex switch for external reading pulsing or MLG Light Grid for
detecting the object distance). Soiling of these sensors can cause incorrect switching
behaviour.
¾
In order to prevent incorrect switching behaviour, remove soiling from the optical
effective surfaces of the external sensors.
Abb. 7-3:
Cleaning of the external optical sensors (reading pulse generator, detector for object
distance)
: clean here
Trigger start
Trigger stop
(optional)