Chapter
3
Operating Instructions
ICR890 High-end CCD Camera System
42
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8011325/0000/2006-10-24
Product description
3.5.2
LEDs of the ICD890 Camera
There are five LEDs for the electrical connections of the ICD890 Camera. These LEDs
display the operating status, the status of the reading result, the illumination switch status,
necessary maintenance or service tasks and data transfer to the serial main data interface.
The LEDs indicate the following:
Fig. 3-14:
LEDs at the ICD890 Camera
LED
Colour
Indication
DEVICE READY
green
•
Lights up after switching on and a successful self-test
•
Lights up permanently during reading operation
•
Goes off when the configuration mode changes
RESULT
green
•
Lights up during reading operation after a successful reading (default setting: Good Read, 100 ms)
IllUMINATION
green
•
Lights up during reading operation if the ICI890 Illumination of the camera is switched on (depends
on the reading pulse)
SERVICE
red
•
Flashes if system maintenance is required
•
Lights up permanently if the system requires servicing
DATA
yellow
•
Flashes during reading operation if data is being transferred between the ICR890 System and the
main data interface at the host
Tab. 3-5: LED indications
