Operating Instructions
Chapter
2
ICR890
Safety information
8011325/0000/2006-10-24
©
SICK AG · Division Auto Ident · Germany · All rights reserved
21
2.5
Environmental information
The ICR890 System has been constructed with minimum environmental pollution in mind.
Excluding the housing, the system does not contain any materials using silicone.
2.5.1
Energy requirements
The ICR890 System is electrically powered via the MSC800 Controller as standard
(functional extra-low voltage in accordance with IEC 364-4-41).
The following power consumption details apply to the system components and the
controller:
•
ICD890 Camera: typically 75 W with 24 V DC ± 10 % (via MSC800 power supply)
•
ICI890 Illumination: typically 350 W with 24 V DC ± 10 % (via MSC800 power supply)
•
MSC800-0000 logic controller: typically 10 W with 24 V DC ± 10 %
2.5.2
Dispose of the device after decommissioning
At present SICK AG will not accept the return of any devices which can no longer be
operated or repaired.
¾
Inoperable or irreparable devices must be disposed of in an environmentally friendly
manner and in accordance with valid country-specific waste disposal guidelines.
The design of the ICR890 System allows for its separation as recyclable secondary raw
materials and hazardous waste (electronic scrap).
Please see
Note
The battery on the internal PC card of the ICD890 Camera must be removed before the
device is scrapped.
¾
Dispose of the battery separately in accordance with ROHS regulations (Europe).
