Chapter
8
Operating Instructions
ICR890 High-end CCD Camera System
102
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8011325/0000/2006-10-24
Troubleshooting
8.4
SICK support
If a system error occurs repeatedly or if you cannot correct an error using the above
measures, the ICR890 System may be defective. The system components cannot be
repaired by the user, meaning that it is not possible to re-establish functions after a failure.
However, the camera or the illumination can be rapidly replaced by the user. See
Chapter 7.3 Replacing a system or a component, page 93
¾
Please contact our local SICK office or subsidary if an error occurs which cannot be
eliminated:
•
The telephone numbers and email addresses are listed on the
back page
of this
manual.
For postal addresses see also
www.sick.com
.
¾
Do not send the device to the SICK service without first contacting us.
F
Function C
HECK
MIN
.
NUMBER
OF
CODES
PRÜFEN
is active.
The ICR890 System has detected less
valid bar codes in the reading pulse
than specified under N
UMBER
OF
CODES
:
MINIMUM
.
Instead of the bar code contents, it
displays the number of the defined
error string, as defined under N
UMBER
OF
CODES
: M
INIMUM
.
In a batch of objects with a constant
number of bar codes an object has less
bar codes than defined.
The message serves as the display of
an error for the objects (e.g. test for
sort pure: mixing with the incorrect
object).
Value
Meaning
Possible cause
Remedy
Tab. 8-7: Meaning of the ST error status in the reading result (cont.)
