COMMISSIONING AND CONFIGURATION
6
75
8011325/18IM/2020-07-02|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | ICR880/890
6.3
Configuring the camera system in SOPAS-ET
Now open the SOPAS-ET configuration interface.
▸
To do so, double-click on the tile in the project tree.
All configurable parameters of the camera system are compiled together in a
corresponding device description for the SOPAS-ET configuration software. The project
tree of the device description is used as an aid for configuration.
6.3.1
Logging into the device
To be able to access all of the camera system's parameters in the SOPAS-ET configuration
software, you must log into the device using the
Service
user level.
After the first start-up, the configuration software works with the
Maintenance Technician
user level (= operator level).
1. Select the
Device
Login
command in the menu bar.
2. In the Login dialog window, select the
Authorized Client
user level and enter the
default password
client
.
3. Click
Login
to confirm your entry.
The parameters that were previously shown grayed out in the windows are now
accessible.
