2
SAFETY
14
8011325/18IM/2020-07-02|SICK
O P E R A T I N G I N S T R U C T I O N S | ICR880/890
Subject to change without notice
2.3.2
General safety notes
General, recognized safety-related rules and regulations were taken into account in the
design and manufacture of the camera systems. However, risks for the user resulting
from the device cannot be completely ruled out. The safety notes below must therefore be
observed.
WARNING
Safety notes
Observe the following to ensure the safe use of the device as intended.
•
The notes in these operating instructions (e.g., regarding use, mounting, or installation)
must be observed.
•
All official and statutory regulations must be observed when operating the device.
•
The national and international legal specifications apply to the installation and use of
the device, to the commissioning of said device, and to recurring technical inspections,
in particular:
– The accident prevention regulations and work safety regulations
– Any other relevant safety regulations
•
The manufacturer and user of the device are responsible for coordinating and
complying with all applicable safety specifications and regulations in cooperation with
the relevant authorities.
•
The checks must be carried out by qualified safety personnel or specially qualified and
authorized personnel and must be recorded and documented to ensure that the tests
can be reconstructed and retraced at any time.
•
These operating instructions must be made available to the operator of the device. The
device operator must be instructed by qualified safety personnel and must read the
operating instructions.
•
Maintenance and repair work must only be done by trained and authorized SICK AG
service technicians or qualified safety personnel of the customer.
WARNING
The device is not a safety device for human protection and therefore does not fulfill any
safety standards.
Measures
▸
For safety applications, please contact SICK AG.
WARNING
Radio interference may result when using the camera system in a residential area.
Measures
▸
Use the camera system in industrial environments only.
