SICK ICR 84x Operating Instructions Manual Download

Page: 45 / 182

Operating instructions

Chapter

ICR 84x Image Code Reader

Electrical installation

8 010 961/0000/10-05-2005

5-7

5.5

Performing electrical installation

5.5.1

Overview of connection procedure

•

Connecting the power supply

•

Connecting the host interface

– or –

Connecting the CAN interface

•

Connecting the auxiliary interface (connecting the PC for parameterization)

•

Connecting the Ethernet interface and the PC to Ethernet for image output

(recommended)

•

Connecting the “Sensor 1“ and “Sensor 2“ switching inputs

•

Connecting the “Result 1“ and “Result 2“ switching outputs

5.5.2

Tools

•

Tool

•

Digital measuring device (current/voltage measurement)

5.5.3

Connecting the power supply

If the ICR is powered via the CDB 420 or CDM 420 Connection Module, the power supply

does not have to be wired separately.

Ensure that the power supply to the CDB 420 or CDM 420 is switched off.

Connect the 15-pin cable plug on the ICR to the corresponding device socket on the

CDB 420 or CDM 420 and screw it tightly. The connection cable can be extended by

2 m (6.56 ft) using the extension cable no. 6 010 075.

The data and functional interfaces of the ICR are connected to the connection module.

– or –

External power supply unit:

Connect the power supply to the red wire (pin 1, +V

) and the black wire (pin 5, GND)

of the cable no. 6 010 137 (see also

Table 5-7

Summary of Contents for ICR 84x




















































































































































































Search results

Summary of Contents for ICR 84x

Reviews:

Related manuals for ICR 84x

Brands by name

Popular brands

SICK ICR 84x, Operating Instructions Manual

Search results

Summary of Contents for ICR 84x

Reviews:

Related manuals for ICR 84x

Brands by name

Popular brands