SICK GRTB18SV, Operating Instructions Manual

Page: 7 / 108

max. 90 Nm
Note the sensor’s maximum permissible tightening torque of 90 Nm.
Note the preferred direction of the object relative to the sensor, cf.
table 1 .
5 Electrical installation
The sensors must be connected in a voltage-free state (U
V
= 0 V). The following informa‐
tion must be observed, depending on the connection type:
–
Male connector connection: pin assignment
– Cable: wire color
Only apply voltage/switch on the voltage supply (U
V
> 0 V) once all electrical connec‐
tions have been established. The green LED indicator lights up on the sensor.
Explanations of the connection diagram (Tables 2 and 3):
Q /
Q
= switching outputs
n. c. = not connected
DC: 10... 30 V DC, see "Technical specifications", page 13
Table 2: DC
GRTB18(S)V x11xxx x13xxx x24xxx x23xxx
1 + (L+) + (L+) + (L+) + (L+)
2
Q
n. c.
Q
n. c.
3 - (M) - (M) - (M) - (M)
4 Q Q Q Q
1= brn
2 = wht
3 = blu
4 = blk
0.14 mm
2
AWG26
1 = brn
-
3 = blu
4 = blk
0.14 mm
2
AWG26
1 2
4 3
1 2
4 3
ELECTRICAL INSTALLATION
5
8021184.16B5 | SICK
Subject to change without notice
7