1
About this document
1.1
Function of this document
These Operating Instructions describe:
•
Device components
•
Installation
•
Operation
•
Maintenance work required for reliable operation
1.2
Scope of application
These Operating Instructions are only applicable for the measuring device described in
the product identification.
They are not applicable for other SICK measuring devices.
The standards referred to in these Operating Instructions are to be observed in the
respective valid version.
1.3
Target groups (and document structure)
This Manual is intended for persons installing, operating and maintaining the device.
Operation
The device may only be operated by qualified persons who, based on their device-spe‐
cific training and knowledge as well as knowledge of the relevant regulations, can
assess the tasks given and recognize the hazards involved.
Installation and maintenance
Skilled persons are required for installation and maintenance.
Please observe the information at the beginning of the respective Sections.
1.4
Further information
•
Operating Instructions of the purge air supply
•
Final inspection record
3G / Zone 2
•
Manual, Pressurized enclosure FS840 and purge medium valve
NOTE
b
Observe all supplied documents.
1.5
Data integrity
SICK AG uses standardized data interfaces such as, for example, standard IP technol‐
ogy, in its products. The focus here is on product availability and features.
SICK AG always assumes that the customer is responsible for the integrity and confi‐
dentiality of data and rights involved in connection with using the products.
In all cases, the customer is responsible for the implementation of safety measures
suitable for the respective situation, e.g., network separation, firewalls, virus protection
and patch management.
ABOUT THIS DOCUMENT
1
8019532/100Q/V1-1/2018-08 | SICK
O P E R A T I N G I N S T R U C T I O N S | GM700 Ex
7
Subject to change without notice